If you aren’t sure where the garage door opener is in your car, try checking the area above the driver’s seat, including below the rear view mirror. It may also be on a panel next to the steering wheel.
To access the “Learn” button, you may need to remove the unit’s light lens, which covers the light bulb inside the unit. In some models, you can open the lens by lightly pressing on it until it swings open. Other models may require a screwdriver. [3] X Research source You may need a ladder to reach your garage door opener unit. Be careful to keep your balance.
Since it can be a little dangerous rushing from a ladder to your car, we recommend that you ask a friend to help you out with this step.
Check that there’s nothing obstructing the garage door from opening or closing Be sure that your car is close to the garage door opener unit, parked either right outside the garage or inside it Check that your car was turned on during the pairing process Re-do the pairing process once more If you’re still having trouble, check the manuals for your car and garage door
Newer models of garage doors have security features that no longer let you do this. If you have a newer model, try the steps above, instead. For certain kinds of garage doors with the Genie brand, you may have to hold the button on your Genie garage door remote control for 10 seconds before pressing the button in your car. [7] X Research source
To access the “Learn” button, you might have to remove the unit’s light lens, which covers the light bulb inside the unit. In some units, you can open the lens by lightly pressing on it until it swings open. Other models may require a screwdriver. [9] X Research source You might need a ladder to reach the garage door opener unit. Be sure to keep your balance while on it.
Check to see if the remote’s battery is dead Make sure that there are no obstructions around the garage door Repeat the pairing process Consult the manuals for your garage door and remote control if you’re still having trouble
